Pms Service Setting - NEC UNIVERGE SV8100 Programming Manual

Issue 11.0
Level:
IN
Description
Use Program 42-06 : PMS Service Setting to set the PMS integration settings when
using PMS-U10 and PMS feature.
Input Data
Item
No.
2 - 518
Item
01 PMS Port Number
02 3:00 AM Auto Room Scan
Set maid required status for all
checked-in rooms At 3:00 AM.
03 CheckIn Message Type
04 CheckOut Auto Status Change
05 AREYUTHERE/LINETEST Send
Timing
06 AREYUTHERE/LINETEST Send
Count
07 Check-out Auto Flexible Status
Change
When PRG42-06-07 and PRG42-
06-04 are both enabled, the status
programmed in PRG42-06-08 is set
upon checkout regardless of the
previous room status.
08 Status for Check-out Auto
Flexible Status Change
When PRG42-06-07 is enabled the
status programmed in 42-06-08 is
set upon checkout.
Program 42 : Hotel Setup

42-06 : PMS Service Setting

Input Data
0~65535
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
1~128 (sec)
0~20 (times)
0 = Disable
1 = Enable
1 = Room Clean (Occupied)
2 = Maid Required
3 = Maid in Room
4 = Inspection Required
5 = Maintenance Request
6 = Out of order
7 = Reserve 1
8 = Reserve 2
9 = Reserve 3
0 = Room Clean (Vacant)
UNIVERGE SV8100
Default
5129
0
0
0
10
3
0
4
Program 42 : Hotel Setup