NEC UNIVERGE SV8100 Programming Manual page 845

UNIVERGE SV8100
Input Data (Continued)
Item
No.
09
10
11
12
13
14
15
16
SV8100 Programming Manual
Item
DTMF Pause
Used only by IPLB. Effective when
84-27-01 = 1 (In Band).
DTMF Positive Twist Level
Used only by IPLB.
DTMF Negative Twist Level
Used only by IPLB.
DTMF Duration (Out of Band)
Used only by IPLB. Effective when
84-27-01 = 2 (Out of Band).
DTMF Level
Used only by IPLB. Effective when
84-27-01 = 2 (Out of Band).
ICMP Redirect
Used only by IPLB.
DTMF Detect Minimum Duration
Used only by IPLB.
This setting is the minimal time setting to
distinguish DTMF tones for the IPLB. If
the signal is shorter than the value set,
the signal is deemed not a DTMF.
DTMF Detect Minimum Level
Used only by IPLB.
This setting is the minimal level setting
to distinguish DTMF tones for the IPLB. If
the signal is shorter than the value set,
the signal is deemed not a DTMF.
Input Data
0: follow RFC2833
25~2000(ms)
0~24(dB)
0~24(dB)
30~2000(ms)
1~61 (-36dB ~ +24dB)
1: -36dB
2: -35dB
:
37: 0dB
:
60: 23dB
61: 24dB
0 = Enable
1 = Disable
0 = Voice Packets WILL follow
ICMP redirect messages.
1 = Voice Packets WILL NOT
follow ICMP redirect
messages.
 for Signaling packets and
ICMP refer to PRG 10-12-08.
23~2000(ms)
0: -40dbm
1: -39dbm
2: -38dbm
:
31: -9dbm
Issue 11.0
Default
0
5
0
100
25 (-12db)
1
30
2 (-38dbm)
2 - 803