NEC UNIVERGE SV8100 Programming Manual page 52

Issue 11.0
Item
No
10
14
15
17
18
19
23
24
25
2 - 10
Item
Master/Slave System
If set to 0, system is synchronized to the
network clock. If set to 1, system is not
synchronized to the network clock. (For
NW Mode)
11
Networking System No. (for NW
Mode)
--- Not Used ---
--- Not Used ---
ISDN Line Ringback Tone
If Telco does not provide ringback tone,
SV8100 can if set to 1 (Enable).
Type of Number
ISDN Protocol definition
Numbering Plan Identification
ISDN Protocol definition
Straight/Cross Wiring
--- Not Used ---
Layer 1 Supervision
When set to 0, Layer 1 deactivation is
not considered to be a fault, so the
channel can be usable and alarm #10
not issued. When set to 1, Layer 1
deactivation is considered to be a fault,
so the channel will be skipped and
alarm #10 issued.
Input Data
0 = Slave System
1 = Master System
0~50
0 = Disable
1 = Enable
0 = Unknown
1 = International number
2 = National number
3 = Network specific number
4 = Subscriber number
5 = Abbreviated number
0 = Unknown
1 = ISDN numbering plan
2 = Data numbering plan
3 = Telex numbering plan
4 = National standard numbering plan
5 = Private numbering plan
0 = Auto
1 = Manual (Cross)
2 = Manual (Straight)
0 = Disable
1 = Enable
Program 10 : System Configuration Setup
UNIVERGE SV8100
Default
0
0
0
2
1
0
0