NEC UNIVERGE SV8100 Programming Manual page 809

UNIVERGE SV8100
SV8100 Programming Manual
Input Data (Continued)
Item
Item
No.
17 Jitter Buffer Mode
Setting 2 (Self adjusting-silent
period-is not valid for IPLB. If this
value is set, the system will
operate as Setting 3.
18 VAD Threshold
19 Idle Noise Level
Not used by IPLB.
20 Echo Canceller Mode
Not used by IPLB. Echo
canceller setup is 84-31 for
IPLB.
21 Signal Limiter
Not used by IPLB.
22 Echo Canceller NLP Mode
When the NLP mode is turned
on, the voice with low level is
replaced with the NLP noise. As
a result, a low echo of the level is
usually removed compared with
the conversation level.
Not used by IPLB. Echo
canceller setup is 84-31 for
IPLB.
Input Data
1 = Fixed
2 = Adaptive during silence
3 = Adaptive Immediately
0~30 (-19dB~+10dB)
0 = Self adjustment
1 = -19dB (-49dBm)
:
2 = 0dB (-30dBm)
:
29 = 9dBm (-21dBm)
30 = 10dBm (-20dBm)
5000~7000
(-5000dBm~
-7000dBm)
0 = Disable
1 = Enable
1 = Mode 0
2 = Mode 1
3 = Mode 2
4 = Mode 3
5 = Mode 4
6 = Mode 5
1. There is no limitation.
2. The limitation is the
maximum.
3. Limitation size
4. It is limiting it.
5. Limitation smallness
6. The limitation is minimum.
0 = 2-wire and 4-wire
1 = 2-wire only
(2-wire means analog and
4-wire means digital).
Issue 11.0
Default
3
20
7000
1
6
1
2 - 767