Ip Routing Table Setup - NEC UNIVERGE SV8100 Programming Manual

Issue 11.0
Program 10 : System Configuration Setup
Level:
IN
Description
Use Program 10-45 : IP Routing Table Setup to set up the IP Routing Table.
Caution! If any IP Address or NIC setting is changed, the system must be reset
for the changes to take affect.
Input Data
Input Data
2 - 64
Routing Table Number
Item
Item
No.
01 Network 0.0.0.0 ~ 126.255.255.254
Address
128.0.0.0 ~ 191.254.255.254
192.0.0.0 ~ 223.255.255.254
02 Subnet 128.0.0.0
Mask
240.0.0.0
254.0.0.0
255.192.0.0
255.248.0.0
255.255.0.0
255.255.224.0
255.255.252.0
255.255.255.128
255.255.255.240
255.255.255.254
03 Default 0.0.0.0 ~ 126.255.255.254
Gateway
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254

10-45 : IP Routing Table Setup

Input Data
192.0.0.0
248.0.0.0
255.0.0.0
255.224.0.0
255.252.0.0
255.255.128.0
255.255.240.0
255.255.254.0
255.255.255.192
255.255.255.248
255.255.255.255
Program 10 : System Configuration Setup
UNIVERGE SV8100
001~100
Default
0.0.0.0
224.0.0.0
252.0.0.0
255.128.0.0
255.240.0.0
255.254.0.0
255.255.192.0 0.0.0.0
255.255.248.0
255.255.255.0
255.255.255.224
255.255.255.252
0.0.0.0