NEC UNIVERGE SV8100 Programming Manual page 816

Issue 11.0
2 - 774
Input Data (Continued)
Item
Item
No.
15 100rel Settings
16 SIP Trunk SIP-URI
E.164 Incoming Mode
Input Data
0 = Use default
settings
1 = Use opposite
settings
Outbound Call:
When set to 0 the
101rel is included in
the supported header
of the invite
message.
When set to 1 the
101rel is NOT
included in the
supported header of
the invite message
Inbound Call:
When set to 0 and
the Invite includes a
101rel in the
supported header of
the invite message
the provisional 1XX
(excluding the 100
Trying) Will contain a
100rel in the
supported header
(which means the
other side must
PRACK this
message).
When set to 1 and
the Invite includes a
101rel in the
supported header of
the invite message
the provisional 1XX
(excluding the 100
Trying) Will NOT
contain a 100rel in
the supported header
(which means NO
PRACK required).
0 = Off 0
1 = Mode 1
2 = Mode 2
Program 84 : Hardware Setup for VoIP
UNIVERGE SV8100
Default
0
(Normal)