NEC UNIVERGE SV8100 Programming Manual page 812

Issue 11.0
2 - 770
Input Data (Continued)
Item
Item
No.
55 High Speed Data Packet
Length
Not used by IPLB.
56 Low Speed Redundancy
Settings 0~2 are valid for IPLB. If
a setting higher than 2 is set, the
system setting is kept at 2.
57 High Speed Data Packet
Redundancy
58 TCF Handling Method
59
Maximum Low Speed Data
Packetization
Not used by IPLB.
60 Transmit Network Timeout
Not used by IPLB.
61 T.38 RTP Format Payload
Number
62 DTMF Level Mode
Used only by IPLB.
63
DTMF Level High
Used only by IPLB.
64 DTMF Level Low
Used only by IPLB.
65 VAD Negotiation on SDP
Select whether or not system
uses SIP negotiation for VAD
usage. When set to '0 = Disable'
system disregards SIP
negotiation result and always
enables the VAD. When set to'1
= Enable' system uses SIP
negotiation and decides VDA
usage according to the result.
Input Data
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
0~5
0~2
0 = Receive TCF signal by
VoIPDB
1 = Through TCF signal to
external FAX
1~65535 bytes
10~32000sec
96~127
0 = VoIPU default value
1 = Main soft value
0 = Disable
1 = -33dBm
:
28 = -6dBm
0 = Disable
1 = -33dBm
:
28 = -6dBm
0 = Disable
1 = Enable
Program 84 : Hardware Setup for VoIP
UNIVERGE SV8100
Default
4
0
0
1
1
150
100
0
28
28
0