NEC UNIVERGE SV8100 Programming Manual page 190

Issue 11.0
2 - 148
Item
Item
No.
17
Trunk to Trunk
Warning Tone for
Long Conversation
Alarm
Enable/Disable the
Warning Tone for
Long Conversation
feature for DISA
callers.
18 Warning Beep Tone
Signaling
19 Privacy Mode
Toggle Option
Enable/Disable a
trunk ability to be
switched from private
to non-private mode
by pressing the line
key or Privacy
Release function key.
20 Block Outgoing
Caller ID
Allow (1)/Prevent (0)
the system from
automatically blocking
outgoing Caller ID
information when a
user places a call. If
allowed (i.e. block,
enabled), the system
automatically inserts
the Caller ID block
code (defined in
14-01-21) before the
user dialed digits.
21 Caller ID Block Code
Enter the code, up to
8 digits, that should
be used as the Caller
ID Block Code. This
code is automatically
inserted before dialed
digits if Program
14-01-20 is set to 1.
Input Data
0 = Disable (No)
1 = Enable (Yes)
0 = Disable (No)
1 = Enable (Yes)
0 = Disable (No)
1 = Enable (Yes)
0 = Disable (No)
1 = Enable (Yes)
Dial (up to eight
digits)
Program 14 : Trunk, Basic Setup
UNIVERGE SV8100
Related
Default
Program
0
0
0
0 14-01-21
 67 14-01-20