Ani/Dnis Service Options - NEC UNIVERGE SV8100 Programming Manual

Issue 11.0
Level:
IN
Description
Use Program 34-09 : ANI/DNIS Service Options to define the ANI//DNIS service
option setup for E&M Class of Service.
Input Data
Item
No.
01 Receive Format
Specify the format of the ANI/DNIS data
received from the telco. Make sure your entry
is compatible with the service the telco
provides. The character  indicates a
delimiter.

02
Delimiter Dial Code
Define the character Telco uses as a delimiter
(see entries 1~5 in Item 1 above). Valid entries
are 0~9,
03 Route Setup of Receive Dial
Specify the source of the data the system
uses to route incoming ANI/DNIS calls. If
option 2 is selected, refer to Program 34-09-
04.
2 - 452
Class of Service
Name
If PRG34-01-02 is selected to 2 (MF), this
PRG works only as 4 =*ANI*DNIS*.
# , and .
Program 34 : Tie Line Setup

34-09 : ANI/DNIS Service Options

Input Data
0 = Address
1 =  ANI 
2 =  DNIS 
 
3 = ANI Address
 
4 = ANI DNIS
5 =  DNIS  ANI
(  = Delimiter Code)
1~9, 0, # , 
0 = Fixed Route (Item
08) (No Routing)
1 = Routes on Received
DNIS or Address
Data
2 = Routes on Received
ANI Data
UNIVERGE SV8100
01~15
Default
COS 2~15
0




0
Program 34 : Tie Line Setup
Related
Program
34-01-02
34-09-02
34-09-01
22-09-01
22-11-01
34-09-04
34-09-08