NEC UNIVERGE SV8100 Programming Manual page 229

UNIVERGE SV8100
Item
Item
No.
35
Encryption
Mode
36 DT700
Firmware
Version
37 DT700 Large
LED
Illumination
Setup
38 Paging
Protocol Mode
39 CTI Override
Mode
40 Calling Name
Display Info via
Trunk for
Standard SIP
41
Time Zone
(Hour)
43
Video Mode
SV8100 Programming Manual
Input Data
0 = Off
1 = On
00.00.00.00~FF.FF.FF.FF
2 = Red
3 = Green
4 = Blue
5 = Yellow
6 = Purple
7 = Light Blue
8 = White
9 = Rotation
0 = Multicast
1 = Unicast
2 = Auto
0 = Disable
1 = Enable
0 = Both name and
number
1 = Name only
2 = Number only
3 = None
0~24 (-12~+12)
0 = Disable
1 = Enable
Default
0
00.00.00.00
3 Sets LED color for
internal Intercom call. In
DT700 local terminal
setting menu, illumination
setting must be
'Automatic', otherwise the
terminal will ignore
PRG 14-01-35,
PRG 15-05-37 and
PRG 15-23 settings.
0 Sets the protocol mode
for the Paging function.
0 Sets the override function
against the terminal that
is controlled by the CTI.
0 Sets the incoming calling
name display type on a
standard SIP terminal.
Trunk name is the first
priority and abbreviated
(SPD) name is second
priority.
12 Sets the time difference
from the system time set
in Program 10-01. Input
hour(s) based on this
Program.
0 This Program is used to
select the video function
with the standard SIP
terminal. If the standard
SIP terminal supports the
video function, the
SV8100 transfers the
video CODEC in SDP
information.
Issue 11.0
Related
Description
Program
2 - 187