NEC UNIVERGE SV8100 Programming Manual page 218

Issue 11.0
Item
No.
24
26
27
28
29
30
34
2 - 176
Item
Conference Key Mode
Allow an extension Conf key to be
programmed for Conference or for
Transfer. When set for 1, the user
places a call on hold, dials the
extension to which it should be
transferred, then presses the Conf
key. The call is then transferred.
When set for 0, with an active call,
the user presses the Conf key,
places a second call, then presses
the Conf key twice. All the calls are
then connected.
MSG Key Operation Mode
Determine whether an extension
MSG key should function as a
Message key or Voice Mail key. If
set as a Message key, users can
press the key to call the voice mail
only when they have new
messages.
Handset Volume
Determine how an extension
handset volume is set after it is
adjusted during a call.

When 1 is assigned in this
program and a user sets the
volume to maximum, the volume
is reset to a level to meet FCC
standards when the user hangs
up.
Message Waiting Lamp Color
Determine whether an extension
Message Waiting Lamp lights
Green or Red when a message is
received.
PB Back Tone Level
Allow adjustment of the PB Back
Tone Level when you are calling an
ISDN Line.
Toll Restriction Class
Select the Toll Restriction Class to
use when placing a call from a
virtual extension.
Call Register Mode
The Caller ID Scroll stores Trunk
calls only (0), or both Internal and
Trunk calls (1).
Input Data
0 = Conference
1 = Transfer
0 = Message Key
1 = Voice Mail Key
0 = Back to Default (Back)
1 = Stay at previous level
(Stay)
0 = Green
1 = Red
1~63 (-15.5dB ~ +15.5dB)
0 = Vir. Ext. (Virtual Extension
Class)
1 = Real Ext. (Real Extension
Class)
0 = Trunk Mode
1 = Extension/Trunk Mode
Program 15 : Extension, Basic Setup
UNIVERGE SV8100
Related
Default
Program
0
0
1
1 15-02-35
15-02-36
15-02-37
15-02-38
32
(0dB)
1
0