NEC UNIVERGE SV8100 Programming Manual page 620

Issue 11.0
Input Data (Continued)
Item
No.
02
2 - 578
Item
Override Mailbox Category
(Override MB Ctg)
Specify the category of the mailbox where
Automated Attendant calls should route when you
enable Answer Schedule Override. SV8100 InMail
mailbox categories are Subscriber Mailbox, Master
Mailbox, and Routing Mailbox.
SV8100 InMail handles the routing according to the
type of mailbox (Subscriber, Call Routing, or
Announcement) within the specified category:
If the Override Mailbox is a Subscriber Mailbox,

the outside caller hears the mailbox greeting (if
recorded) and can leave a message.
If the Override Mailbox is an Announcement

Mailbox, the outside caller shears the recorded
announcement. Depending on how the
Announcement Mailbox is programmed,
SV8100 InMail then hangs up, reroutes the call,
or provides additional dialing options.
If the Override Mailbox is a Call Routing

Mailbox, the outside caller hears the instruction
menu and can dial any option allowed by the
associated Dial Action Table.
 If any of the Input Data values are entered, the
terminal displays the Override Mailbox
Number selection (below).
Override Mailbox Number
(Override MB Num)
Specify the mailbox where Automated Attendant
calls should route when you enable Answer
Schedule Override. The mailbox number you select
in this option should match the mailbox category
specified in 47-11-02: Override Mailbox Category
above.
UNIVERGE SV8100
Input Data
0 (Undefined)
1 (Subscriber
Mailbox – STA)
2 (Group Mailbox)
3 (Routing Mailbox)
Digits
(three maximum,
using 0~9)
Program 47 : In-Mail
Default
0
No Entry