Program 26 : Ars Service; Automatic Route Selection Service - NEC UNIVERGE SV8100 Programming Manual

Level:
IN
Description
Use Program 26-01 : Automatic Route Selection Service to define the
system options for Automatic Route Selection (ARS).
Input Data
Item
No.
01 ARS Service
Enable/Disable ARS.
02 Network Outgoing InterDigit ARS Time
With Networking, this time replaces 20-03-04
when determining if all network protocol digits
have been received. If ARS is enabled at Site
B, this time can be programmed for 5 (500ms)
at Site A. If ARS is disabled and Site B is using
F-Route for outbound dialing, this time should
be programmed for 30 (three seconds) at Site
A.
03 ARS Misdialed Number Handling
If a user dials a number not programmed in
ARS, this option determines if the system
should route over Trunk Group 1 or play error
tone.
06 Class of Service Match Access
07 F-Route Access COS Reference
08 DT700 Multi Log-on for ARS
0 refers to PRG 26-04
1 refers to PRG 26-13
SV8100 Programming Manual

26-01 : Automatic Route Selection Service

Item
0 = Disable (Off)
1 = Enable (On)
0~64800 (sec)
(in 0.1 second
increments)
0 = Route to Trunk
1 = Play Warning Tone
0 = Disable (Off)
1 = Enable (On)
0 = F-Route
1 = ARS
0 = Disable (Off)
1 = Enable (On)

Program 26 : ARS Service

Input Data Default
0
30
0
Group 1
to Dialer
0
0
0
Program
26
Related
Programming
26-02
26-03
26-04
20-03-04
21-02
26-02
26-02
44-05
26-04
26-13
2 - 401