Pms Service Setting - NEC Univerge SV8100 Programming Manual

Issue 10.1
Level:
IN
Description
Use Program 42-06: PMS Service Setting to set the PMS integration settings when
using PMS-U13 and PMS feature.
Input Data
Item
No.
01
PMS Port Number
02
3:00 AM Auto Room Scan
At 3:00 AM sets 'maid required' status for all
checked-in rooms.
03
CheckIn Message Type
04
CheckOut Auto Status Change
05
AREYOUTHERE/LINETEST Send Timing
06
AREYOUTHERE/LINETEST Send Count
07
Check-out Auto Flexible Status Change
When PRG42-06-07 and PRG42-06-04 are both
enabled, the status programmed in PRG42-06-08 is
set upon checkout regardless of the previous room
status.
08
Status for Check-out Auto Flexible Status
Change
When PRG42-06-07 is enabled the status
programmed in 42-06-08 is set upon checkout.
2 - 524
Program 42 : Hotel Setup
Item

42-06 : PMS Service Setting

Input Data
0~65535
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
1~128 (sec)
0~20 (times)
0 = Disable
1 = Enable
1 = Room Clean (Occupied)
2 = Maid Required
3 = Maid in Room
4 = Inspection Required
5 = Maintenance Request
6 = Out of order
7 = Reserve 1
8 = Reserve 2
9 = Reserve 3
0 = Room Clean (Vacant)
= Reserve 5

# = Reserve 6
Program 42 : Hotel Setup
UNIVERGE SV8100
Default
5129
0
0
0
10
3
0
4