NEC Univerge SV8100 Programming Manual page 831

UNIVERGE SV8100
Input Data
Item
No.
Note 1:
Note 2:
Feature Cross Reference
None
Programming Manual
Item
61
T.38 RTP Format Payload Number
62
DTMF Level Mode
Used only by IPLB.
63
DTMF Level High
Used only by IPLB.
64
DTMF Level Low
Used only by IPLB.
65
VAD Negotiation on SDP
Select whether or not system uses SIP
negotiation for VAD usage. When set to
'0 = Disable' system disregards SIP
negotiation result and always enables
the VAD. When set to'1 = Enable'
system uses SIP negotiation and
decides VAD usage according to the
result.
66
Voice Band Data (VBD)
Enable or Disable the VBD feature.
This program has to set '1 = Enable'
when PRG15-03-03 is set '1 = Special'
and also PRG15-03-18 is '1 = Modem'
Related: PRG 15-03-03, PRG 15-03-18
67
VBD Payload Type
Setup the Payload Type number when
using VBD.
For IPLA, 0~270ms is valid. If set to more than 270ms, then buffer size is 270ms.
For IPLA, 0~160ms is valid. If set to more than 160ms, then buffer size is 160ms.
Conditions
None
Input Data
96~127
0 = VoIPU default value
1 = Main soft value
0 = Disable
1 = -33dBm
:
28 = -6dBm
0 = Disable
1 = -33dBm
:
28 = -6dBm
0 = Disable
1 = Enable
0 = Disable
1 = Enable
96 ~ 127
Issue 10.1
Default
100
0
28
28
0
0
97
2 - 795