NEC Univerge SV8100 Programming Manual page 229

UNIVERGE SV8100
Item
No.
39
40
41
42
43
Programming Manual
Item Input Data
0 = Disable
CTI Override
1 = Enable
Mode (AU)
0 = Both name and
Calling Name
number
Display Info
1 = Name only
viaTrunk for
2 = Number only
Standard SIP
3 = None
0~24 (-12~+12)
Time Zone
(Hour)
0 ~ 120(-60 ~ +60
Time Zone
minute)
(minute)
0 = Disable
Video Mode
1 = Enable
Default Description
0
Sets the override
function against
the terminal that is
controlled by the
CTI.
0 Sets the incoming
calling name
display type on a
standard SIP
terminal. Trunk
name is the first
priority and
abbreviated
(SPD) name is
second priority.
12 Sets the time
difference from
the system time
set in Program
10-01. Input
hour(s) based on
this Program.
60
Sets the time
difference from
the system time
set in Program
10-01. Input
minute(s) based
on this Program.
0 This Program is
used to select the
video function
with the standard
SIP terminal. If
the standard SIP
terminal supports
the video function,
the SV8100
transfers the
video CODEC in
SDP information.
Issue 10.1
Related
Program
2 - 193