Sip System Information Setup - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Program 10 : System Configuration Setup
Level:
SA
Description
Use Program 10-28 : SIP System Information Setup to set up basic SIP trunking.
Input Data
Item
No.
Programming Manual

10-28 : SIP System Information Setup

Item
01
Domain Name
Set the domain name of the SIP-
URL.
02
Host Name
Set the host name of the SIP-
URL.
03
Transport Protocol
Set the protocol for the
connection.
04
UserID
User ID in the SIP Invite Setup
message. Use it for outbound
caller ID information if no
information is assigned in
commands 21-17, 21-19, 15-16,
14-12, and 10-36. A call cannot be
completed across the span if there
is no outbound CID info. The
reason for this is: the from and
display portion of the invite
message would be blank, and it
would not know where the call
originated from.
05
Domain Assignment
If the information from Telco was a
domain name (siptrunk@sip.com)
then set to domain. If the
information for Telco was a IP
address then set to IP Address.
Input Data
Up to 64 Characters
(ex.:UserID@HostName.DomainName)
Up to 48 Characters
(ex.:UserID@HostName.DomainName)
0 = UDP
1 = TCP
Up to 32 Characters
When assigning the User ID, the ID may
contain only alpha characters. (A space
and/or special characters are not allowed
in the User ID field).
(ex.:UserID@HostName.DomainName)
0 = IP Address
1 = Domain Name
Issue 10.1
Default
None
None
0
None
0
2 - 47