Sip Extension Basic Information Setup - NEC Univerge SV9100 Manual

Program
Program Name
Number
SIP Extension Basic
84-20-01 Information Setup – Registrar/
Proxy Port
SIP Extension Basic
Information Setup – Session
Timer Value
84-20-02
SIP Extension Basic
Information Setup – Minimum
84-20-03 Session Timer Value
SIP Extension Basic
Information Setup – Called
84-20-04
Party Info
SIP Extension Basic
Information Setup – Expire
84-20-05
Value of Invite
Program
Program Name
Number
IP Telephone Terminal Basic
Data Setup – Terminal Type
15-05-01
9-18
5.1.6

SIP Extension Basic Information Setup

Use these programs to assign basic SIP extension information.
Description/
Comments
Define SIP station
Proxy Port.
Define the periodic
refresh time that allows
both user agents and
proxies to determine if
the SIP session is still
active.
Define to convey the
minimum allowed value
for the SIP session
timer.
Define the SIP
Extension presented
Caller ID information.
Define the time out
response value for SIP
invite.
5.1.7 IP Phone Configuration
Use these programs assign IP phone configuration information.
Description/
Comments
Review the type
protocol support by the
IP Phone.
Viewing Only – No
changes
permitted.
Assigned Data
1~65535
Default is 5070
0~65535
Default is 180
0~65535
Default is 180
0 = Request URI
1 = To Header
Default is 0
0~3600 seconds
Default is 180
Assigned Data
1 = H.323
2 = SIP
3 = None
4 = DT800/DT700
Default = 3
IP Single Line Telephone (SIP)
Issue 2.0
1 2 3
1 2 3