Configure Voipdb Networking Information - NEC Univerge SV9100 Manual

Issue 2.0
S 5 P
ECTION ROGRAMMING
5.1
Program
Program Name
Number
GCD-CP10 Network
Setup –Default
10-12-03 Gateway
GCD-CP10 Network
Setup – IP Address
10-12-09
GCD-CP10 Network
10-12-10 Setup –Subnet Mask
IP Trunk Availability
– Trunk Type
10-68-01
IP Trunk Availability
10-68-02
– Start Port
IP Trunk Availability
10-68-03
– Number of Ports
SV9100 Networking Manual

Configure VoIPDB Networking Information

The VoIPDB should be connected to the same IP Subnet as the GCD-CP10. It
also requires a valid IP address. Use these programs to assign VoIPDB network
related information.
 If any IP Address or NIC setting is changed, the system must be reset for the
changes to take affect.
Description/Comments
Assign the IP Address for
the Router.
Assign the IP Address of
the VoIPDB.
Assign the Subnet Mask of
the VoIPDB.
Assign the H.323 Trunk
Availability.
Assign the start port
number of H.323 Trunks.
Assign the Number of
H.323 Trunks
Assigned Data
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
Default is 0.0.0.0
0.0.0.0 ~ 126.255.255.254
128.0.0.13~191.255.255.254
192.0.0.1~223.255.255.254
Default is 172.16.0.10
255.255.0.0
Default is 255.255.0.0
0 = None (Default)
1 = SIP
2 = H.323
3 = CCIS
Range: 0~400
Default is 0
Range: 0~400
Default is 0
1 2 3
X
X
X
X
X
X
9-13