NEC Univerge SV9100 Manual page 110

Issue 2.0
Program/
Description/Selection
Item No.
44-02-03 Dial Analysis Table for ARS/
F-Route Access –
Additional Data
44-05-01 ARS/F-Route Table – Trunk
Group Number
44-05-02 ARS/F-Route Table –
Delete digits
44-05-03 ARS/F-Route Table –
Additional Dial Number
Table
44-05-09 ARS/F-Route Table – Max
Digit
SV9100 Networking Manual
Assigned Data
0 = No setting Enter additional data required for the Service Type
1 = Delete Digits = 0~255 selected in PRG 44-02-02.
(255 = delete all
digits)
2 = 0~500
3 = Dial Extension
Analyze Table
Number = 0~4
Default is 0
0 = Not Set Select trunk group number used for outgoing ARS
1 ~ 100 = Trunk Group calls.
from 14-05
Setting of 255 = Internal Extension Call.
101 ~ 150 Networking
255 = Extension Call
Default is 0
0 = No setting Enter number of digits to delete from the dialed
1~254 number.
255 = Delete all Digits
Default is 0
0 = No setting Enter table number (defined in 44-06) for additional
1~1000 digits to be dialed.
Default is 0
0 = No Max Assign Max digits for the Call Park Retrieve Access
1~24 Code.
Default is 0
Comments
4-31