NEC Univerge SV9100 Manual page 121


R
ELATED




G
UIDE TO
This guide provides a list of associated Programs that support this feature.
Program/ Description/
Item No. Selection
Basic Trunk Data Setup –
Trunk-to-Trunk
14-01-24
Outgoing Caller ID
through Mode
Class of Service Options
(Outgoing Call Service) –
20-08-13
ISDN CLIP
ISDN Calling Party Number
Setup for Trunks
21-12-01
ISDN Calling Party Number
21-13-01
Setup for Extensions
4-42
outbound call.
The Calling Party Number (CPN) is not sent to the network when the originating
station of the remote system calls a station in the main system that is call
forwarded off site.
F L
EATURE IST
ISDN Compatibility
Automatic Route Selection
Central Office Calls, Placing
T1 Trunking (with ANI/DNIS Compatibility)
F P
EATURE ROGRAMMING
Assigned Data
0 = Off
1 = On
Default is 0
0 = Off
1 = On
Default is 1
Up to 16 digits max.
Default is No Setting
Up to 16 digits max.
Default is No Setting
Comments
Enable Outgoing Caller ID through Mode for
each CCIS trunk to enable CPN information
to pass through the Tandem Office.
Tandem System Only
Determine if the ISDN calling line identity
presentation and screening indicators are to
be allowed.
Assign each trunk a Calling Party Number.
When a call is made by an extension which
does not have an Extension Calling Number
assigned
(Program 21-13), the system sends the
calling number for the ISDN trunk defined in
21-12.
Assign each extension a Calling Party
Number.
Features and Specifications
Issue 2.0