Programming For Open Numbering Plan; Table 3-5 Open Numbering Plan Assignments - NEC Univerge SV9100 Manual

Issue 2.0
Program/
Item No.
44-02-03
44-05-01
1.5
Program/
Item No.
11-01-01
44-02-01
44-02-02
44-02-03
44-05-01
SV9100 Networking Manual
Table 3-4 Closed Numbering Plan Assignments (Continued)
Description/
Selection
Dial Analysis Table for
ARS/F-Route Access –
Additional Data
ARS/F-Route Table –
Trunk Group Number

Programming for Open Numbering Plan

Use these programs to assign the number of digits to Access Code and to make
ARS assignments.

Table 3-5 Open Numbering Plan Assignments

Description/
Selection
System Numbering
Dial Analysis Table for
ARS/F-Route Access –
Number of digits to be
analyzed by the system
Dial Analysis Table for
ARS/F-Route Access –
Service Type
Dial Analysis Table for
ARS/F-Route Access –
Additional Data
ARS/F-Route Table –
Trunk Group Number
Assigned Data
2 = 0 ~ 500
(0 = No Setting)
Default is 0
0-100,101-150,255
0 = Not Set
1~100 = Trunk Group from
14-05
101~150 = Networking
255 = Extension Call
Default is 0
Assigned Data
2 = Extension Number
Up to eight digits can be
assigned.
Default is No setting
2 = ARS/F-Route Table
Default is 0
2 = 0 ~ 500
(0 = No Setting)
Default is 0
0-100,101-150,255
0 = Not Set
1~100 = Trunk Group from
14-05
101~150 = Networking
255 = Extension Call
Default is 0
Comments
When setting data is 2, refer to
Program 44-05 for further routing
options.
Select the trunk group to be used
for the outgoing K-CCIS call.
Comments
Default for 1X, 2X, and 3X is 2
Assign the digits to be dialed
across the K-CCIS link. These
digits were assigned as F-Route
in Program 11-01-01.
Use line key l for "Don't Care"
digit @.
Service type 2 assigns the digits
to be dialed to an F-Route.
Program 44-02-03 assigns the
F-Route to be used.
When setting data is (2), refer to
Program 44-05.
Select the trunk group to be used
for the outgoing K-CCIS call.
3-5