Shared Tandem Co Trunk Calls - NEC Univerge SV9100 Manual

Issue 2.0
1.9
PRG 11-01-01
Dial 9 = 1 digit: Trunk Access
PRG 11-09-01
Trunk Access Code = 9
PRG 11-09-02
nd
2
PRG 26-01-01
ARS Service = On
PRG 26-02-01
ARS Analysis TBL1 = 1214
ARS Analysis TBL2 = 1972
ARS Analysis TBL3 = 1817
PRG 26-02-02
ARS Analysis TBL1 = F-Route
ARS Analysis TBL2 = F-Route
ARS Analysis TBL3 = TRG (Trunk Group)
SV9100 Networking Manual

Shared Tandem CO Trunk Calls

The following diagram provides an example of Programs and item numbers that
should be assigned when two sites share CO lines for reducing Long Distance
calls using Automatic Route Selection (ARS).
The example assumes that the UNIVERGE SV9100 systems are connected via
K-CCIS and using Closed Numbering Plan. All local calls are 10-digit dial and all
1+ calls are 11-digit dial.
MB = Memory Block
TB = ARS Table
UNIVERGE
SV9100
Remote
CO Trunks
Area Code 817
Area Code 940
101s
Trunk Access = 8
TRK = Trunk
DN = Dial Number
K-CCIS Link
TG10 TG10
PRG 11-01-01
Dial 9 = 1 digit: Trunk Access
PRG 11-09-01
Trunk Access Code = 9
PRG 11-09-02
nd
2 Trunk Access = 8
PRG 26-01-01
ARS Service = On
PRG 26-02-01
ARS Analysis TBL1 = 1817
ARS Analysis TBL2 = 1940
ARS Analysis TBL3 = 1214
PRG 26-02-02
ARS Analysis TBL1 = F-Route
ARS Analysis TBL2 = F-Route
ARS Analysis TBL3 = TRG (Trunk Group)
TG = Trunk Group
RT = ARS Route
UNIVERGE
SV9100
Main
CO Trunks
Area Code 214
Area Code 972
301s
3-17