Figure 7-1 H.323 Tie Line Programming Example - NEC Univerge SV9100 Manual

Table 7-8 IP Networking (H.323) CODEC Assignments (Continued)
Description/
Program/
Item No. Selection
84-01-67 H.323 Trunk Basic
Information Setup – G.722
Jitter Buffer (max)
84-01-68 RTP Filter
2.6

Figure 7-1 H.323 TIE Line Programming Example

7-12
Assigned Data
0~300ms
Default is 120
0 = Disable
1 = Enable
2 = Enable (SSRC)
Default is 1
H.323 TIE Line Programming Example
Figure 7-1 H.323 TIE Line Programming Example
TIE line for H.323.
The following programs are assigned in this example.
Program
PRG 10-12-09 *
PRG 10-12-10 *
PRG 11-01-01 Digit 1x
PRG 11-01-01 Digit 2x
PRG 11-02-01
PRG 14-05-01
Main Site (Office A)
192.168.1.10
255.255.255.0
3 Digits, Extension
3 Digits, F-Route
100, 101, etc.
Set all IP Trunks to Trunk Group 10
Issue 2.0
Comments
illustrates how to program a
Remote Site (Office B)
192.168.2.40
255.255.255.0
Program 11-01-01 Digit 1x
3 Digits, F-Route
Program 11-01-01 Digit 2x
3 Digits, Extension
200, 201, etc.
H.323 Trunking