NEC Univerge SV9100 Manual page 277

Issue 2.0
Item
No.
01
02
03
04
05
06
07
08
09
10
11
12
SV9100 Networking Manual
For PRTA PKG Setup
ISDN Line Number
Item
--- Not Used ---
Logical Port Number
 The start port number of a PRI line
is displayed.
--- Not Used ---
Layer 3 Timer Type
 Each timer value of Layer 3 is set up
for each type in
Program 81-06 (T-Bus)
CLIP Information
Based on this setting, the system
includes a Presentation Allowed (1) or
Presentation Restricted (0) in the Setup
message to allow or deny the Calling
Party Number. Program 15-01-04 must
also be set to 1 if this option is enabled.
Length of Cable
--- Not Used ---
Dial Sending Mode
ISDN Protocol definition
Dial Information Element
ISDN Protocol definition
(Only when Dialing Sending Mode
(10-03-08) is set for 1 (Overlap
Sending)
--- Not Used ---
--- Not Used ---
--- Not Used ---
01~24
Input Data
1 = for T-Bus 1~400
1~5
0 = Disable
1 = Enable
0 = Level 1
1 = Level 2
2 = Level 3
3 = Level 4
4 = Level 5
0 = Enbloc Sending
1 = Overlap Sending
0 = Keypad Facility
1 = Called Party Number
Default
1
1
1
2
1
0
4-13