NEC Univerge SV9100 Manual page 577

Number and
Name of
Setting
1. WAN Mate
IP Address
2. WAN SIP
Mate Port
3. WAN Self
IP Address
Number
and Name
of Setting
1. RTP Self
Port
2. SIP Self
Port
11-4
WAN Settings: 0. Config/ 2. SIP Settings/ 8. NAT Traversal/ 3. WAN
Settings [Eco, Value, Sophisticated]
Setting Default
Value Value
IP Address 0.0.0.0
1024~6553 5060
5
IP Address 0.0.0.0
Self Port Settings: 0. Config/ 1. Network Settings/ 6. Advanced Settings/ 5.
Self Port Settings [Eco, Value, Sophisticated]
Default
Setting Value
Value
1024~65528 3462
(Even
numbers
only)
1024~65535 5060
Factory Auto
Value Config
Available Available WAN Address of the router that
the SV9100 resides behind. This
setting must match what is
programmed in PRG 10-12-07.
Available Available Port number the SV9100 uses for
SIP registration in PRG 10-46-
06.
Available Available Only used when Static NAT is
enabled.
This setting is the WAN address
of the router that the NAPT
Terminal resides behind.
Factory
Auto Config
Value
Available Not available The number of the port
Available Not available The number of the port
Issue 2.0
Description
Description
receiving RTP data.
Note: At default this is
assigned to port 3462. The
first IP phone on this local
LAN can use this port. The
second IP phone would need
to be changed to port 3464.
receiving SIP data.
Note:At default this is
assigned to port 5060. The
first IP phone on this local
LAN can use this port. The
second IP phone would need
to be changed to port 5062.
NAPT