Transfer - NEC Univerge SV9100 Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

3.28 Transfer

The following types of Transfer are available with Networking:

Screened Transfer

Unscreened Transfer

Transfer to busy extension

Transferring Trunk Calls

To Transfer a trunk call to a co-worker's extension:

1. At system phone, press HOLD.

At a single line telephone, hookflash.

You hear Transfer dial tone.

2. Dial co-worker's extension number.

If the extension is busy or doesn't answer, you can dial another extension number or press the line key to return

to the call.

SLT users can retrieve the call by pressing hookflash. If a call has been transferred and the SLT user has hung

up the handset, the call be can retrieved by dialing ** and the extension number to which it had been trans-

3. Announce call and hang up.

If you don't have Automatic On Hook Transfer, you must press Conf or your Transfer Programmable Function

Key to Transfer the call.

If your co-worker doesn't want the call, press the flashing line key to return to the call.

SLT users can retrieve the call by pressing hookflash. If a call has been transferred and the SLT user has hung

up the handset, the call be can retrieved by dialing ** and the extension number to which it had been trans-

If you don't want to screen the call, hang up without making an announcement.

Transferring to a busy extension

Will require setting in Program number 24-01-01, must be enabled at the originating system and the target

1. Dial the co-worker's extension number.

Busy tone is heard.

2. Press the Transfer button.

The call will wait for the busy co-worker to become free and then will ring.

SV9100 Networking Manual