NEC Univerge SV9100 Manual page 552

Issue 2.0
51-03 : NetLink Internet Protocol Address List Setting
Level:
IN
Description
Use Program 51-03 : NetLink Internet Protocol Address List Setting to set the IP
address of the NetLink system.
Input Data
Item
No.
01
Feature Cross Reference
None
SV9100 Networking Manual
List ID
Item
Internet Protocol Address List
The system seeks the Primary system based on
this list.
When there is no Primary system yet, or
Fail-Over occurs, Node List is referred to
establish new link. This setting is necessary
when Program 51-01-03 is 0, or Program
51-05-02 is other than 0.
Once the system connects to the Primary
System, this setting is updated by the Primary
system when Program 51-13-01 is On. So,
enter IP address of the systems which may
become Primary at least.
Conditions
The system seeks Primary system based on this list.

When there is no Primary System yet, or Fail-Over occurs, Node List is referred

to establish new link.
This setting is necessary when Program 51-01-03 is 0, or Program 51-05-02 is

other than 0. Once the system connects to the Primary System, this setting is
updated by the Primary system when Program 51-13-01 is on. So, enter IP
address of the systems which may become Primary.
Program 51 : NetLink Service
Input Data
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
1~50
Default
0.0.0.0
10-65