Programming Example; Sv9100 Ip K-Ccis Programming Example 1; Section 1 K-Ccis Programming - NEC Univerge SV9100 Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

This is an example of UNIVERGE SV9100 program data assignments for a 4-digit

Closed Numbering Plan using Closed Number Blocks. The following system

configurations are used for all four systems:

Each system is a single chassis with one CHS2U.

Each system has 16 multiline terminals.

Each system has eight analog trunks.

Figure 5-11 Programming Example 1

Point Code 00001

192.168.1.10

GW1: 192.168.1.11

Assume that the systems are defaulted (first power on) with the following cards

installed as described in the following table.

Point Code 00002

192.168.1.20

GW1: 192.168.1.21

SV9100 IP K-CCIS