NEC Univerge SV9100 Manual page 357

Issue 2.0
Program
Program Name/Description
Number
10-29-06 SIP Server Information Setup – Registrar IP
Address
Define the Registrar IP Address. The carrier
may provide an IP address. In most cases, a
domain name is used so this entry is left at the
default.
10-29-07 SIP Server Information Setup – Registrar
Port Number
Define the Registrar Port Numbers.
10-29-11 SIP Server Information Setup – Registrar
Domain Name
Define the Registrar Domain Name (normally
provided by the SIP carrier).
For example: mysipserver.sipprovider.com
10-29-12 SIP Server Information Setup – Domain
Name
Define the domain name of the SIP PROXY
Server provided by the SIP Carrier.
For example: if the SIP Proxy server address is
proxy.sipprovider.com, you would assign
sipprovider.com in this program.

If no SIP Proxy address is provided, use the SIP
Registration address as the proxy address.
10-29-13 SIP Server Information Setup – Proxy Host
Name
Assign the Proxy Host Name of the SIP PROXY
Server provided by the SIP Carrier.
For example: if the SIP Proxy server address is
proxy.sipprovider.com, you would assign proxy
in the program.

If no SIP Proxy address is provided, use the SIP
Registration address as the proxy address.
10-29-14 SIP Server Information Setup – SIP Carrier
Choice
Define the SIP Carrier Choice.

Selecting Carrier B automatically sets
Program 10-29-16 to on (1). Program 10-29-16
MUST be set to off for incoming calls to route using
the lowest available trunk port.

Each certified vendor my use a different carrier
type. Visit NTAC website (http://www.necntac.com)
to verify the proper setting per vendor.
SV9100 Networking Manual
Input Data
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
(Profile 1 ~ Profile 2)
0 ~ 65535
(Profile 1 ~ Profile 2)
Maximum of 128 characters.
(Profile 1 ~ Profile 2)
Maximum of 64 characters.
(Profile 1 ~ Profile 2)
Maximum of 48 characters.
(Profile 1 ~ Profile 2)
0 ~ 26
1 ~ 26 =
Carrier Type A ~ Carrier Type Z
(Profile 1 ~ Profile 2)
Level
Default
1 2 3
0.0.0.0

5060

No Setting

No Setting

No Setting

0

6-11