NEC Univerge SV9100 Manual page 300

Item
Item
No.
43 Video Mode 0 = Disable
1 = Enable
44 Using 0 = Disable
Standard SIP
1 = Enable
Display for
CPN
45 NAT Plug & 0 = Disable
Play
1 = Enable
46 0 = Not assigned
Door Phone
Number (Read
1 ~ 8 = Door Phone
Only)
47 Registration 0 = Disable
Expiration
60 ~ 65535(sec)
Timer for NAT
48 Subscribe 0 = Disable
Expire Timer
60 ~ 65535(sec)
for NAT
4-36
Input Data
Number
Default Description
0 This Program is used to
select the video function with
the standard SIP terminal. If
the standard SIP terminal
supports the video function,
the SV9100 transfers the
video CODEC in SDP
information.
0 This Program is used to
Enable or Disable the
system to send INVITE from
tag Display attribute which is
sent from a standard SIP
terminal as CPN to ISDN,
and if there is no Display
attribute from standard SIP
terminal, the system will not
refer to either PRG 21-12-01
or 21-13-01 and no CPN will
be sent.
0
Select sending RTP port
number to remote router. (0)
uses result from negotiation
result, (1) from received RTP
packet. Effective only when
10-46-14 is to NAT Mode.
0
Indicates automatically
assigned IP Door Phone
Number after system
registers the Door Phone
port. System assigns the
number not to duplicate with
the Door Phone connected
to PGD(2)-U13. (Read
Only)
180 On a per station basis, this
setting defines the SIP
registration expiry timer. If
this value is set to 0, for a
NAPT terminal, the value in
PRG 84-23- 01 is applied.
180 On a per station basis, this
setting defines the SIP
Subscribe expiry timer. If this
value is set to 0, for a NAPT
terminal, the value in PRG
84-23-02 is applied.
Issue 2.0
Related
Program
10-46-14
10-03
(DLCA)
PGD
10-46-14
10-46-14
Programming