NEC Univerge SV9100 Manual page 476

Hide thumbs Also See for Univerge SV9100:
Table of Contents

Advertisement

Issue 2.0
Program
Program Name
Number
GCD-CP10 Network
10-12-10
Setup – Subnet Mask
GCD-CP10 Network
10-12-11
Setup – NIC Setup
IP Phone Basic Setup -
15-05-50
Peer to Peer Mode
SV9100 Networking Manual
Description/Comments
Define the Media Gateway
Subnet Mask Address.
Define the LAN interface
Speed and Mode of the VoIP
Application supported.
Enable or Disable Peer-to-
Peer mode for SIP Phone.
When PRG 10-33-05 NAT
mode is set 1 = Enable, the
P2Pmode for SIP Phone is
always set (Off) automatically
regardless of this program
setting.
Assigned Data
1
128.0.0.0
192.0.0.0
224.0.0.0 240.0.0.0
248.0.0.0
252.0.0.0
254.0.0.0
255.0.0.0 255.128.0.0
255.192.0.0
255.224.0.0
255.240.0.0
255.248.0.0
255.252.0.0
255.254.0.0
255.255.0.0
255.255.128.0
255.255.192.0
X
255.255.224.0
255.255.240.0
255.255.248.0
255.255.252.0
255.255.254.0
255.255.255.0
255.255.255.128
255.255.255.192
255.255.255.224
255.255.255.240
255.255.255.248
255.255.255.252
255.255.255.254
255.255.255.255
(default =
255.255.0.0)
0 = Auto Detect
1 = 100Mbps, Full
Duplex
2= 10Mbps, Full
X
Duplex
3 = 1Gbps, Full
Duplex
(default = 0)
0 = No (Disable)
1 = Yes (Enable)
(default = 0)
2
3
X
9-9

Advertisement

Table of Contents
loading

Table of Contents