Figure 1-8 Mesh Topology (Pbx-To-Kts) - NEC Univerge SV9100 Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

Figure 1-8 Mesh Topology (PBX-to-KTS)

UNIVERGE SV9100

A UNIVERGE SV9100 can be connected to a PBX only as a remote

office. The UNIVERGE SV9100 software can register a maximum of

255 point codes in the UNIVERGE SV9100 network. The network must

consist of a PBX-to-KTS structure with the KTS programmed as a

remote office. The KTS must be located as the end-point in the

UNIVERGE SV9100 network.

Determining Number of K-CCIS Routes

When the system is a Central Office or Tandem Office, two or more routes to other

offices are required. Each GCD-CCTA can support one K-CCIS link. Up to eight

GCD-CCTA blades can be installed in a UNIVERGE SV9100 system. The KTS

requires the GCD-CCTA to support a K-CCIS interface.

One Common Signaling Channel (CSC) can support up to 127 voice channels, if

General Information <US Only>

UNIVERGE SV9100