Section 8 Communication Server Database Synchronization - NEC Univerge SV9100 Manual

Configuration Flow (Case 1)
1.
2.
3.
4.
10-48
Create a Recovery Database
Because each communication server database and communication server
configuration are updated by the Primary System, creating a recovery database is
recommended. This may be needed if the communication server goes back to a
stand-alone server.
Refer to the Section 8 Communication Server Database Synchronization on page
10-37 and Section 9 Create Recovery Database on page 10-39
Before programming the NetLink feature, general IP configuration
must be performed.
❍
CAUTION
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
For NetLink, the minimum programs must be set:
System IP Address List (Program 51-03-01)

System ID (Program 51-01-01)

After entering the System ID, the communication server asks to reboot the
communication server. Reboot.
When the communication server comes up, the Primary System and Secondary
Systems are determined automatically.
If you need to change the Primary System to another server, use
Change Primary System on page 10-36
When connection cannot be made to the original Primary System, and a new
Primary is selected, it can automatically return the original server as the Primary
System after connection/power is restored. Refer to the
Primary System (Primary System Automatic Integration) on page 10-35
Primary Based on System ID
–
.
– Recommended
Program 10-12-09 : VoIPDB IP Address
Program 10-12-10 : Subnet Mask
Program 84-26-01 : VoIPDB DSP IP Address
Program 10-12-03 : Default Gateway
Program 10-12-09 : VoIPDB IP Address
Program 10-12-10 : Subnet Mask
Program 84-26-01 : VoIPDB DSP IP Address
Program 10-12-09 : VoIPDB IP Address
Program 10-12-10 : Subnet Mask
Program 84-26-01 : VoIPDB DSP IP Address
Program 10-12-03 : Default GatewayProgram 10-12-09 : VoIPDB
IP Address
Program 10-12-10 : Subnet Mask
Program 84-26-01 : VoIPDB DSP IP Address
Program 10-12-03 : Default Gateway
Program 10-12-09 : VoIPDB IP Address
Program 10-12-10 : Subnet Mask
Program 84-26-01 : VoIPDB DSP IP Address
Program 10-12-03 : Default Gateway
.
Issue 2.0
sections.
7.1 Forced
Section 7 Top Priority
function.
SV9100 NetLink