System Tones And Ring Tones - NEC Univerge SV9100 Manual

S 7 M
ECTION ISCELLANEOUS
7.1
7.2
S 8 C
ECTION ONFIGURATION
8.1
8-8

System Tones and Ring Tones

IP Phones do not use Program 80-01: Service Tone Setup entries. The tones are
generated locally by the IP telephone. When a Door Box chime rings an IP
telephone, the system activates the chimes using a ring command. Because of
this, if the volume is adjusted while the door chime is sounding, the ringing volume
of the IP Phone is adjusted.
Music on Hold
In addition, Music on Hold is provided by the IP telephone. The settings in
Program 10-04: Music on Hold Setup are ignored except to determine whether or
not music is to be provided. If 10-04-02 is set to 0, no Music on Hold is heard. If
10-04-02 is set to 1 or 2, music is provided by the IP telephone.
E
XAMPLES
IP Addressing
When using a GPZ-IPLE, only 1 IP Address is needed for all DSP's. It should be
the same subnet of the IP defined in 10-12-09.
The following chart shows the minimum and maximum number of IP addresses
used with different GPZ-IPLE card configurations.
Minimum IP
Card
Addresses
GPZ-IPLE
Maximum IP
Addresses
The number of DSP channels
depends on the VOIP license
1 2
loaded to GCD-CP10 up to 256.
Issue 2.0
Notes
IP Multiline Station (SIP)