Section 13 Port Assignment - NEC Univerge SV9100 Manual

Issue 2.0
S 12 M
ECTION AINTENANCE
Confirming NetLink Basic Information
From a multiline terminal, press Feature + 5. The LCD display shows the System ID,
Primary/Secondary, IP Address of the VOIPDB (not GCD-CP10), and the Primary
System ID.
Confirming Communication Server Status
If an installer needs to know the status of each communication server, on the Primary
System, access Program 51-11 from telephone programming. The following is
displayed:






S 13 P
ECTION ORT
Port assignment starts from the Primary System lowest slot number. The port
numbers for the Secondary Systems are assigned in the order in which the
communication servers are connected. The next port number is assigned to the first
Secondary System which connects to the NetLink SV9100.
(See the example)
SV9100 Networking Manual
F
EATURES
IP Address
MAC Address (GCD-CP10)
Communication Server Name
Software Version
Primary Priority
Connect Status
OFF: The communication server is disconnected.
–
ON: The communication server is connected as secondary.
–
Primary: The communication server is connected as primary.
–
A
SSIGNMENT
10-41