NEC Univerge SV9100 Manual page 402

Issue 2.0
Programming - GCD-CP10:
10-12-01 : GCD-CP10 Network Setup - IP Address (for GCD-CP10)
10-12-10 : GCD-CP10 Network Setup - Subnet Mask
10-12-03 : GCD-CP10 Network Setup - Default Gateway
10-12-09 : GCD-CP10 Network Setup - IP Address
(This assignment is for GCD-CP10 when the GPZ-IPLE daughter board is
installed.)
10-13-01 : In-DHCP Server Setup - DHCP Server Mode
10-14-01 : Managed Network Setup
10-14-02: Managed Network Setup
10-16-16: SIP Server Address
10-16-27: SIP Server Port
Programming - GPZ-IPLE:
84-26-01 : IPL Basic Setup - IP Address
Programming - IP Phones:
DHCP Mode (Ext. 200):
SV9100 Networking Manual
0.0.0.0
255.255.255.0
192.168.1.254
192.168.1.20
On
Enable
192.168.1.200 Min
192.168.1.250 Max
192.168.1.20
5080
192.168.1.21
Enabled
8-11