Description; Figure 2-2 Gcd-Ccta Blade - NEC Univerge SV9100 Manual

Issue 2.0
S 3 I
ECTION NSTALLING THE

Figure 2-2 GCD-CCTA Blade

3.1
SV9100 Networking Manual
GCD-CCTA

Description

The GCD-CCTA blade is common to both UNIVERGE SV9100 and SV9300
systems.
The Common Channel Handler Interface blade is a digital trunk blade that
terminates FT1 trunks (up to 24 DS-0 channels) providing a common channel
signal interface.
The GCD-CCTA (Common Channel Handler) is an optional blade that provides a
common channel signal through the GCD-CCTA to a K-CCIS network and
controls the signaling between the KTS and the CP10. Each GCD-CCTA blade
supports one K-CCIS link. Eight GCD-CCTA blades can be installed per system.
The T1 interface has a single 24 channel 64kb/s digital signal circuit that can be
configured for T1 trunking.
(CCIS Trunk Interface)
2-5