Figure 8-21 Pc Port Settings Window; Tagging Data Packets Using Ip Phone - NEC Univerge SV9100 Manual

Issue 2.0

Figure 8-21 PC Port Settings Window

SV9100 Networking Manual

15.3.3 Tagging Data Packets Using IP Phone

Follow these steps program for data packet tagging using an IP telephone.
1. While logged in to the IP address of the phone on the PC, go to
Network Settings>Advanced Settings>PC Port Settings.
Refer to Section
2. Access the following three menus to select options for PC Port
Settings:
Port VLAN Mode

Port VLAN ID

Port VLAN Priority .

3. Select the VLAN Mode to enable or disable this feature.
15.3.1 Logging In on the PC on page 8-30.
8-33