Netlink Communication Port Settings - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Level:
IN
Description
Use Program 51-09 : NetLink Communication Port Settings to set the various
communication ports used on the system.
Input Data
Item
No.
01
02
03
04
05
06
Programming Manual

51-09 : NetLink Communication Port Settings

Item
Primary Waiting Port
Sets the communication port that the Primary
system uses to communicate with the
Secondary system.
Communication Waiting Port
Port used to communicate between nodes. It is
always opened by all nodes.
Secondary Communication Port
Secondary system communicates with Primary
system at this port number. If 0 is specified,
temporary port is selected by dynamic.
Primary Search Port
When Fail-Over occurred, each system
communicates with other system at this port
number.
If 0 is set, temporary port is selected by dynamic.
If 0 is not specified, the number and continuous
maximum 50 number is used.
(Ex. 5000 is specified 5001, 5002...5049 will be
used).
Primary Detection Port
Enter port number to seek the Top Priority
Primary system.
If 0 is specified, temporary port is selected by
dynamic.
Database Replication Communication
Listening Port
This port is used to replicate database.
Program 51 : NetLink Service
Input Data
0~65535
0~65535
0~65535
0~65535
0~65535
0~65535
Issue 1.0
Default
58000
58001
0
0
0
58002
2 - 573