NEC Univerge SV8100 Programming Manual page 57

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Input Data (Continued)
Item
Item
No.
04 Time Zone 0~24 (0 = -12 Hours and 24 = +12 Hours)
05 0 = Auto Detect
NIC
Interface
1 = 100Mbps, Full Duplex
2 = 100Mbps, Half Duplex
3 = 10Mbps, Full Duplex
4 = 10Mbps, Half Duplex
06
Network 0 = No (Disable)
Address
1 = Yes (Enable)
Port
Translation
(NAPT)
Router
Setup
07 NAPT 0.0.0.0 ~ 126.255.255.254
Router IP
128.0.0.1 ~ 191.255.255.254
Address
192.0.0.1 ~ 223.255.255.254
(Default
Gateway
[WAN])
08 0= (Enable)
ICMP
Redirect
1= (Disable)
09 IP Address 0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
Programming Manual
Input Data Default Description
+7 Determine the offset
(-5 hours)
from Greenwich Mean
Time (GMT) time.
Then enter its
respective value. For
example, Eastern
Time (US and
Canada) has a GMT
offset of -5. The
program data would
then be 7 (0= -12, 1=
-11, 2= -10, 3= -9, 4=
-8, 5= -7, 6= -6, 7= -5,
......24= +12)
0 NIC Auto Negotiate
(CD-CP00-US)
0 If using an external
NAPT Router or not.
0.0.0.0 Sets the IP address
on the WAN side of
router.
0 When receiving ICMP
redirect message, this
determines if the IP
Routing Table
updates automatically
or not.
172.16.0.10 Set for IPLA.
Issue 1.0
2 - 23