NEC Univerge SV8100 Programming Manual page 59

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Program 10 : System Configuration Setup
Level:
SA
Description
Use Program 10-13 : In-DHCP Server Setup to setup the DHCP Server built into the
CD-CP00-US blade.
Input Data
Item
No.
01
02
05
Conditions
None
Feature Cross Reference
Programming Manual
Item
0
DHCP Server
Mode
1 = Enable
Days 0~255
Lease Time
Hour 0~23
Minutes 1~59
0
Last DHCP Data
1 = Enable
Voice Over Internet Protocol (VoIP)
10-13 : In-DHCP Server Setup
Input Data Default
= Disable 0
0 day
0 hour
30 minutes
= Disable 1
Issue 1.0
Description
Enable or disable the use of the
built-in DHCP Server.
Lease Time of the IP address to a
client.
Pressing the Transfer Key
increments to the next setting
data.
If 10-13-01 is enabled, this setting
determines if DHCP resource is
enabled or disabled.
2 - 25