Programming Password Setup - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
Level:
IN
Description
Use
password entry, the system allows eight users to be defined. Each user can have a:
The IN level password is used by the System Installer for system programming. The
SA or SB level password cannot access the IN level programs. The reverse type
(white on black) just beneath the Description heading is the program access level.
You can only use the program if your access level meets or exceeds the level the
program requires. (SA level password can access to SA or SB programs, and SB
level password can access to SB programs only.)
Before changing your numbering plan, use the PC Programming or WebPro Programming to
make a backup copy of your system data.
Input Data
Item
No.
01
02
03
2 - 696
Program 90 : Maintenance Program

90-02 : Programming Password Setup

Program 90-02 : Programming Password Setup
Unique alphanumeric name (up to 10 alphanumeric characters)
Password entry of up to eight digits (using 0~9,
Password level
User Number
Item
Maximum 10 characters
User Name
Up to 8 digits
Password
0 = Prohibited User
User Level
1 = MF (Manufacturer Level)
2 = IN (Installer Level)
3 = SA (System Administrator Level 1)
4 = SB (System Administrator Level 2)
5 = UA (User Programming Level 1)
to set the system passwords. For
and )
#
CAUTION
Input Data
Program 90 : Maintenance Program
UNIVERGE SV8100
1~8