Acd Voice Mail Delay Announcement - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
Level:
SA
Description
Use Program 41-19 : ACD Voice Mail Delay Announcement to assign InMail
Master Mailboxes (PRG 47-03) as ACD Delay "Announcement" Mailboxes.
Input Data
Item
No.
01
02
03
04
05
06
07
2 - 452

41-19 : ACD Voice Mail Delay Announcement

ACD Group Number
Item
Delay Message Start Timer
Determines how long the system waits before playing the
Delay Message.
Mailbox Number for 1st Announcement Message
Assigns the Voice Mail ACD Announcement Mailbox as
the message source for the 1st Announcement Message.
1st Delay Message Sending Count
Determines the 1st Delay Message Sending Count. This
entry must be set to 1 or higher for the message to play.
Mailbox Number for 2nd Announcement Message
Assigns the Voice Mail ACD Announcement Mailboxes as
the message source for the 2nd Announcement Message.
2nd Delay Message Sending Count
Determines the 2nd Delay Message Sending Count. This
entry must be set to 1 or higher for the message to play.
Wait Tone Type at Message Interval
Determines what the caller hears between the messages.
ACD Forced Disconnect Time after 2nd
Announcement
Assigns how long the system should wait after the end of
the ACD Delay Message before disconnecting.
Program 41 : ACD Setup
0 ~ 64800 (sec)
Dial
(up to eight digits)
0 = No message is
1 ~ 255
Dial
(up to eight digits)
0 = No message is
1 ~ 255
0 = Ring Back
1 = Music On Hold
2 = Background
0 ~ 64800 (sec)
UNIVERGE SV8100
1 ~ 64
Input Data Default
0
No Setting
0
played.
No Setting
0
played.
0
Tone
Tone
Music Source
0
Program 41 : ACD Setup