Ccis Destination System Settings - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
Program 50 : Common Channel Interoffice Signaling Service
Level:
IN
Description
Use Program 50-03 : CCIS Destination System Settings to assign information of
remote systems in a CCIS Network.
Input Data
Item
No.
01
02
03
04
Conditions
None
Feature Cross Reference
None
2 - 546

50-03 : CCIS Destination System Settings

CCIS System ID
Item
Destination Point Define the Point Code at the
Code
Destination Party.
CCIS Route ID Select the CCIS Route ID defined in
(T1 only)
Program 14-13 when the user tries to
access the system in a CCIS network.
Assign the IP Address to a CCIS
IP Address
(IP only)
System ID.
Define if the system associated with
Point Code
Availability
Destination Code can be Reached (1)
or Not Reach (0). If set to 0 (Disable),
when using the IP-CCIS that system
will not be able to be called until it is set
to 1 (Enable).
Program 50 : Common Channel Interoffice Signaling Service
Description
UNIVERGE SV8100
1~255
Input Data Default
0~16367 0
0~8 0
(CCIS Route IDs
5~8 are for
future use and
should not be
used.)
xxx.xxx.xxx.xxx 0.0.0.0
(xxx = 0~255)
0:Disable 1
1:Enable