Figure 8-28 Sip Dt800/Dt700 Basic Setup; Figure - NEC Univerge SV9100 Manual

Figure 8-28 SIP DT800/DT700 Basic Setup

8-40
Individual. If different IP phones require different ToS assignments, due to the

network configuration, these assignments must be set at each individual station
Command 84-23 requires a Hexadecimal representation of the 8 bit ToS field.
For example, to assign the signaling packets an IP precedence value of 4 and the
voice packets an IP precedence value of 5, it would be as follows. Refer to
8-28 SIP DT800/DT700 Basic
80 in Hex is 10000000 - This represents the signaling packets leaving the IP

phone
A0 in Hex is 10100000 - This represents the voice packets leaving the IP phone

Setup.
Issue 2.0

Figure

IP Multiline Station (SIP)