NEC Univerge SV9100 Manual page 67

Program/
Item No.
44-05-02
44-05-03
44-05-04
44--05-05
44-05-06
44-05-07
44-05-08
44-05-09
3-6
Table 3-5 Open Numbering Plan Assignments (Continued)
Description/
Selection
ARS/F-Route Table –
Delete Digits
ARS/F-Route Table –
Additional Dial Number
Table
ARS/F-Route Table –
Beep tone
ARS/F-Route Table –
Gain Table Number for
Internal Calls
ARS/F-Route Table –
Gain Table Number for
Tandem Connections
ARS/F-Route Table –
ARS Class of Service
ARS/F-Route Table –
Dial Treatment
ARS/F-Route Table –
Maximum Digit
Assignment
Assigned Data
0 = No Setting
1 ~ 255 = Number of digits
to delete
(255 = Delete All)
Default is 0
0 = No Setting
1 ~ 1000 = Add Table in
Program 44-06-01
Default is 0
0 = Off
1 = On
Default is 0
0 = No Setting
1 ~ 500
Default is 0
0 = No Setting
1 ~ 500
Default is 0
0 = No Setting
1 ~ 16
Default is 0
0 = No Setting
1 ~ 15
Default is 0
0 = No Maximum
1 ~ 24
Default is 0
System Data Programming <US Only>
Issue 2.0
Comments
Enter the number of digits to be
deleted from the dialed number.
Enter the table number defined in
Program 44-06 for additional
digits to be dialed.
Select whether or not a beep is
heard if a lower priority trunk
group is used to dial out.
Select the gain table number to
be used for the internal call
defined in Program 44-07.
Select the gain table number to
be used for the internal call
defined in Program 44-07.
Select the ARS Class of Service
to be used for the table. An
extension ARS COS is
determined in Program 26-04-01.
If a Dial Treatment is selected,
Programs 44-05-02 and
44-05-03 are ignored and the
Dial Treatment defined in
Program 26-03-01 is used
instead.
Assign the Maximum Digits for K-
CCIS or ISDN Calls.