NEC Univerge SV9100 Manual page 486

Issue 2.0
Program
Program Name
Number
IP Telephone Terminal Basic
Data Setup – IP Phone Fixed
Port Assignment
15-05-02
IP Telephone Terminal Basic
15-05-07 Data Setup – Using IP
Address
IP Telephone Terminal Basic
Data Setup – CODEC Type
15-05-15
IP Telephone Terminal Basic
Data Setup – Password
15-05-16
IP Telephone Terminal Basic
Data Setup – IP Duplication
Allowed Group
15-05-18
Video Mode
15-05-43
SV9100 Networking Manual
Description/
Comments
MAC Address of MAC address
registered MLT SIP 00-00-00-00-00-00 to
phone is stored and/or FF-FF-FF-FF-FF-FF
can input the MAC
address of an MLT SIP Default is
phone so when it comes 00-00-00-00-00-00
online it is provided with
the extension in which
the
MAC address matches.
Informational Only 0.0.0.0~255.255.255.255
registered IP Phones
Default is 0.0.0.0
Assign the CODEC 1-Type 1
Type of the MLT SIP. 2-Type 2
3-Type 3
4-Type 4
5-Type 5
Default is 1
Assign the Up to 24 characters
authentication
password for SIP single
line
telephones. Default not assigned
If an adapter has one IP 0 = Disable
address coming into it 1 = Enable
but multiple extensions
off of it, assign all Default is 0
extensions to a group
so the CPU knows that
the one IP address is
assigned to multiple
extensions.
This Program is used to 0 = Disable
select the video function 1 = Enable
with the standard SIP
terminal. If the standard Default is 0
SIP terminal supports
the video function, the
SV9100 transfers the
video CODEC in SDP
information.
Assigned Data 1 2 3
9-19