Conference - NEC Univerge SV9100 Manual

Issue 2.0

3.10 Conference

ference
The user can create a Conference call to include a user in a networked system.
Operation
To establish a Conference:
Keyset
1. Establish Intercom or trunk call.
2. Press Conf or Conference key (PGM 15-07 or SC 751: 07) or press HOLD and dial #1.
3. Dial extension you want to add.
OR
Access outside call
OR
Retrieve call from Park orbit.
To get the outside call, you can either press a line key or dial a trunk/trunk group code.
You can optionally go back to step 2 to add more parties to your Conference.
4. When called party answers, press CONF or Conference key twice or HOLD key twice.
If you cannot add additional parties to your Conference, you have exceeded the system's Conference limit.
5. Repeat steps 2 - 4 to add more parties.
Single Line Set / 2-Button Telephone
1. Establish Intercom or trunk call.
2. Single Line Set
Hookflash and dial #1.
2-Button Telephone
Press HOLD and dial #1
3. Dial extension you want to add.
OR
Access trunk call.
OR
Retrieve call from Park orbit.
4. Single Line Set
Hookflash and repeat step 3 to add more parties.
OR
Hookflash twice to set up the Conference.
2-Button Telephone
Press HOLD and repeat step 3 to add more parties.
OR
Press HOLD twice to set up the Conference.
If you cannot add additional parties to your Conference, you have exceeded the system's Conference
limit.
SV9100 Networking Manual 13-27