NEC Univerge SV9100 Manual page 173

Program/
Description/Selection
Item No.
11-12-22 Service Code Setup
(Service Access) – Meet
Me Answer to External
Paging
15-07-01 Programmable Function
Keys
20-10-06 Class of Service Options
(Answer Service) – Meet
Me Conference and Paging
20-14-07 Class of Service Options for
DISA/E&M – External
Paging
31-01-01 System Options for Internal/
External Paging –All Call
Paging Zone Name
31-01-02 System Options for Internal/
External Paging –Page
Announcement Duration
31-01-04 System Options for Internal/
External Paging –Privacy
Release Time
31-04-01 External Paging Zone
Group
4-94
Assigned Data
Default is 765 The Service Code assigned in this Program is used
for Meet Me Answer to External Paging.
19 = External. Group Set the functions of programmable extension
Paging 1~8 Function Keys.
20 = External. All Call
Paging
21 = Internal. Group
Paging 1~64
22 = Internal. All Call
Paging
0 = Off Enable Meet Me Conferencing and Paging.
1 = On
Default is 1
0 = Off Allow DISA or Tie Line Trunk user to use External
1 = On Paging.
Default is 1
Up to 12 Characters Assign a name to each All Call Internal Paging
Default is Group All Zone. The name is displayed to make the
announcement.
0~64800 seconds Set the length of Paging Announcements.
Default is 1200
0~64800 seconds After user initiates a Meet Me or Voice Call
conference, the system waits this time for the
Default is 90 Paged Party to answer the call.
0 = No Setting Assign each External Paging Zone to an External
Default: Paging Group.
Speaker 1 = Group 1
Speaker 2 = Group 2
Speaker 3 = Group 3
Speaker 4 = Group 4
Speaker 5 = Group 5
Speaker 6 = Group 6
Speaker 7 = Group 7
Speaker 8 = Group 8
Speaker 9 = CPU Group
1
Issue 2.0
Comments
Features and Specifications